A test program in Intel Hex format can be found in the Code section of the side pane. Save the "MUL_BY_10.TXT" file on your PC. Open it with Notepad or Notepad++, copy the text, and paste it into the Code Window. Click the "Load Hex" button then Reset and Run. The program continuously reads the SENSE switches, multiplies the read value by 10, and outputs the result to the DATA LEDs. Of course, the input and output values are in binary, so conversion to decimal will have to be done. For instance, setting the SENSE switches to 00 000 010 or 2 decimal will result in DATA LED's showing 00 010 100 or 20 decimal.
For More Information or to report problems, contact:
Dick Whipple at [email protected]